Melbourne Tool Company Low Angle Jack and Block Plane Kit

Melbourne Tool Company Low Angle Jack and Block Plane Kit

SKU: MTC-2-KIT
Price: $329.00
Adding to cart… The item has been added

If you want to work with wood, then you need good hand planes. This Melbourne Tool Company Low Angle Jack and Block Plane Kit provides you with the two most important planes every woodworker every needs. A fundamental tool kit for anyone loves to work with wood.

Working with hand tools is one of the great pleasures of woodworking. And to do this well, you need good tools. Melbourne Tool Company offers tools that are genuine, accurate and accessible, tools designed for the woodworker in you.

Your MTC Low Angle Plane Kit

If you could only ever have two hand planes what would they be? More than likely it would be a Jack plane and a Block plane. Why? Because between these two planes you can complete almost all planing tasks the enthusiast woodworker will ever want to tackle. From planing straight edges, through to flattening wide boards, dealing with tricky end grain or chamfering detail edges. Between these two planes you can do it all.

Features & Benefits

An uncomplicated set of planes

These planes are uncomplicated tools. Their minimalistic designs make it easy to disassemble for maintenance and reassemble for work. The adjustment knobs are accessible and feature a very smooth action. Adjust each planes blades depth of cut and skew easily and securely. Spend more time planing, less time adjusting.

12 degree bed

Each plane blade is set bevel-up in the milled plane bed at 12 degrees providing you with a very cool low angle of attack. Choose from a range of blade angles to suit the work at hand. The blades fix down hard down on the plane casting, so blade’s cutting edge is provided with maximum support no matter the terrain. Swap the blades out easily and quickly when you need to change gear. Watch your productivity grow with this versatile set of hand tools.

M2 High Speed Steel blades

MTC has chosen M2 High Speed Steel (HSS) for the blades. M2 HSS has high abrasion resistance which means it will hold a sharp edge much longer than many other steels. This also means that it may take a little longer to bring up an edge. Don’t worry, you will be leaving your sharpening gear on the shelf for a lot longer too. MTC plane blades are also thicker than the average plane, this eliminates vibration in the cut, ensuring a smooth uniform finish.

Adjustable mouths

All these planes feature an adjustable mouth. Twist the front handle to release the toe. Use the mouth adjustment lever to set the mouth width opening to suit the work at hand. Close the mouth up tight to minimise tear out when working difficult figured materials. Open wide to when working more predictable materials and make shavings fast without clogging.

3 angled blades available

Each of these planes are supplied with a blade sharpened to 25 degrees. Along with the 12 degree bed, you now have an effective cutting angle of 37 degrees - perfect for shaving end grain. Also available are blades ground to 38 degrees suitable for smoothing, and 50 degrees for smoothing figured material. Blades are easily swapped in and out of the plane by removing the lever cap. All MTC blades are made from M2 High Speed Steel. Visit the MTC plane blade pages to purchase additional blades.

MTC-2-KIT includes:

MTC-2-DELUXE includes:

!